EQUIPMENT TRACKER
Ticket History
Search, filter, sort, and review every repair, maintenance item, task, and project.
208Shown
208Total
32In Bank
93Completed
| Actions | Ticket | Type | Status | Work / Due Date | Equipment / Task | Problem / Details | Diagnosis | Parts | Parts Price | Labor Hours | Current Hours | Current Miles | Assigned | Submitted By | Location | Schedule | Recurring | Created | Completed | Calendar Order |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Open | T-3 | Task | Not Started | 1/3/2028 | Update Websites | .Net10 reaches end of life November 14, 2028. https://weededsiteoperationsmanual-bmgmbchmadbrbchz.canadacentral-01.azurewebsites.net/ this link should explain in depth how to update it. make sure you do this for all three websites hosted on Azure. (snowplow, Equipment Tracker, site operations manual). if you dont do it in time none of the sites will work and the site documenting how to fix it also wont work. as of the time of creating this task and the support website the new .Net format is currently unknown, same with exactly how to install it. go through the checklist you will most likely need to heavily rely on google. the sites were originally built on .NET8 and then migrated, its not hard and very possible. good luck | — | — | — | — | — | — | Unassigned | Jack | — | Start Jan 3, 2028 | No | 8/7/2026 | — | 0 |
| OpenPrint | R-187 | Repair | Not Started | 10/16/2026 | Salt Dogg S31 | terrible squeal when running in morning | — | — | — | — | — | — | Unassigned | David | — | Start work Oct 16, 2026 | No | 10/7/2026 | — | 0 |
| Open | T-8 | Project | Not Started | 10/16/2026 | Flatbeds Battery Shutoffs | Add battery shut-offs to all 5 flatbeds | — | — | — | — | — | — | Brad | David | Shop | Start Oct 16, 2026 | No | 8/15/2026 | — | 0 |
| OpenPrint | R-58 | Repair | In Progress | 10/16/2026 | Ford F-550 | No start and coolant leak | Bateeries have dead cell, not allowing proper charge, alternator failed charge test, water pump has leak | Water pump, batteries, alternator and new coolant BATTERY HAS BEEN REPLACED | — | 8 | — | — | Brad | Brad | Shop | Start work Oct 16, 2026 | No | 8/21/2026 | — | 4 |
| OpenPrint | R-179 | Repair | Not Started | 10/15/2026 | Stick edger | poor performance | — | — | — | — | — | — | Unassigned | Brad | — | Start work Oct 15, 2026 | No | 10/5/2026 | — | 0 |
| OpenPrint | R-178 | Repair | Not Started | 10/15/2026 | string trimmer | wont stay running | — | — | — | — | — | — | Unassigned | Brad | — | Start work Oct 15, 2026 | No | 10/5/2026 | — | 0 |
| OpenPrint | R-177 | Repair | Not Started | 10/15/2026 | String Trimmer #9 - Echo SRM-2320T | poor performance, random shut off during operation | — | — | — | — | — | — | Unassigned | Brad | — | Start work Oct 15, 2026 | No | 10/5/2026 | — | 0 |
| OpenPrint | R-184 | Repair | In Progress | 10/15/2026 | Stinger #01 - Stinger Quad-AER 3000 | No start, possible dead battery | power at the key, power wire to plug hsa broken connector preventing contact with the key to signal power to the starter, the harness will need to be replaced, temporary fix suggested to finish season out. after testing a direct connection and attempting the "patch" it has been found that the lack of power is a break in the harness, and the ignition cylinder, will need both replaced and wireed correctly. | need electrical t tap to finish repair | — | — | — | — | Brad | Howard | Shop | Start work Oct 15, 2026 | No | 10/5/2026 | — | 1 |
| OpenPrint | R-185 | Repair | Not Started | 10/14/2026 | Walk behind Aerator | Water drum is busted | Water drum expanded and blew, leaving massivew hole in drum. | New drum, drive bearings needed. Ordered parts from bobcat | — | — | — | — | Unassigned | Brad | — | Start work Oct 14, 2026 | No | 10/6/2026 | — | 0 |
| OpenPrint | R-175 | Maintenance | Not Started | 10/14/2026 | Run all Flatbeds and Deathstar | Drive all flatbeds and deathstar 5 minutes.. to the Roost and Back | — | — | — | — | — | — | Unassigned | David | — | Start work Oct 14, 2026 | Yes | 10/5/2026 | — | 1 |
| OpenPrint | R-180 | Repair | Not Started | 10/14/2026 | back pack blower | poor performance | — | — | — | — | — | — | Unassigned | Brad | — | Start work Oct 14, 2026 | No | 10/5/2026 | — | 2 |
| OpenPrint | R-181 | Repair | Not Started | 10/14/2026 | back pack blower | muffler has fallen off | — | — | — | — | — | — | Unassigned | Brad | — | Start work Oct 14, 2026 | No | 10/5/2026 | — | 3 |
| OpenPrint | R-186 | Repair | Not Started | 10/13/2026 | Death Star - 2005 GMC T7500 | Left front headlight is out LIC plate is expired Brake pedal on the right side sticks...the left side is operating normally No power to the back up camera---very important for usage of the vehicle Inspection out 09/26 | — | — | — | — | — | 46031 | Unassigned | Howard | — | Start work Oct 13, 2026 | No | 10/7/2026 | — | 0 |
| OpenPrint | R-147 | Repair | In Progress | 10/13/2026 | Stigl HS 82T | random shut down during operation | — | — | — | — | — | — | Unassigned | Brad | — | Start work Oct 13, 2026 | No | 9/18/2026 | — | 0 |
| OpenPrint | R-107 | Repair | Waiting for Parts | 10/13/2026 | Mower #8 - Wright Stander X | Over revving; Brake handle won't stick in place | Parking brake bushings have failed, spring pressure is pulling lever back down, adjustments need made Wright has discontinued the bushings. No available vendors offer inventory to purchase. Throttle operation needs adjustment. High revving symptom seems to be from a vacuum leak. Triage of unit will go further. Replaced the vacuum cap, unit runs fairly smooth. Rpms match setting when in operation but come back up at idle. | will have to find a third party source for parts at this time. | — | — | — | — | Unassigned | David | — | Start work Oct 13, 2026 | No | 9/10/2026 | — | 1 |
| OpenPrint | R-120 | Repair | Waiting for Parts | 10/13/2026 | Mower #3 - Wright Stander X | Both hydro pumps leaking | Both hydro pumps are leaking. Upper gaskets leaking on both left and right pumps. Seal kits have been delivered. Caster wheel on front right is broken. Inspection of unit shows no other issues at this time. | Seal kits and fluid | — | — | — | — | Unassigned | Brad | — | Start work Oct 13, 2026 | No | 9/14/2026 | — | 3 |
| OpenPrint | R-193 | Repair | Completed | 10/12/2026 | mower #7 - Wright Stander X | sluggish performance, misfiring, unable to complete field usage | During inspection found the air filter was severly clogged, left side spark plug was fouled in a normal manner, the right side spark plug was overly fouled and had an extreme amount of build up that would not burn off or clean up. Upon further investigation and checking oil level, the unit was filled approx. 2 1/2 quarts over the needed amount. Shredded belt on pto system. After addressing issues of initial complaint, unit operates at 3/4 throttle but will cut off when pto is engaged. When inspecting the intake and mixer system, heavy oil build up is visible. Breather sleeve ( venturi tube ) is craked and saturated in oil. Air flow for propane mix is now altered causing unit shut down at full throttle and when pto is engaged. | New breather sleeve ( Kawasaki) , air filter, oil, spark plugs | — | — | — | — | Brad | Merritt | Shop | Start work Oct 12, 2026 | No | 10/9/2026 | 10/12/2026 | 0 |
| OpenPrint | R-188 | Maintenance | Not Started | 10/12/2026 | All sidewalk snow equipment | run All sidewalk snow equipment everywhere it is parked | — | — | — | — | — | — | Unassigned | David | — | Start work Oct 12, 2026 | No | 10/7/2026 | — | 0 |
| Open | T-31 | Task | Not Started | 10/12/2026 | 3 Wheel Blowers Pre Seaason Purple Tag | Recurring due date: 9/21/2026 | — | — | — | — | — | — | Unassigned | David | — | Start Oct 12, 2026 | No | 10/9/2026 | — | 0 |
| Open | T-30 | Task | Not Started | 10/12/2026 | Hurricane Pre-season Purple tag | Recurring due date: 9/14/2026 | — | — | — | — | — | — | Unassigned | David | — | Start Oct 12, 2026 | No | 10/9/2026 | — | 0 |
| OpenPrint | R-169 | Repair | Waiting for Parts | 10/12/2026 | Mower #16 - Wright Stander X | Sluggish performance and back fire | Emissions canister on side of motor had a vacuum cap with a hole in it causing a vacuum leak and poor performance After doing that fix and operating- discovered further issue.. hydro pump belt tensioner, need spring tool for idler arm replacement. | Replaced vacuum cap, hydro pump belt tensioner, need spring tool for idler arm replacement. | — | — | — | — | Unassigned | Merritt | — | Start work Oct 12, 2026 | No | 9/30/2026 | — | 3 |
| OpenPrint | R-192 | Repair | Waiting for Parts | 10/9/2026 | mower #7 - Wright Stander X | sluggish performance, misfiring, unable to complete field usage | During inspection found the air filter was severly clogged, left side spark plug was fouled in a normal manner, the right side spark plug was overly fouled and had an extreme amount of build up that would not burn off or clean up. Upon further investigation and checking oil level, the unit was filled approx. 2 1/2 quarts over the needed amount. Shredded belt on pto system. After addressing issues of initial complaint, unit operates at 3/4 throttle but will cut off when pto is engaged. When inspecting the intake and mixer system, heavy oil build up is visible. Breather sleeve ( venturi tube ) is craked and saturated in oil. Air flow for propane mix is now altered causing unit shut down at full throttle and when pto is engaged. | New breather sleeve ( Kawasaki) , air filter, oil, spark plugs | — | — | — | — | Brad | Merritt | Shop | Start work Oct 9, 2026 | No | 10/8/2026 | — | 0 |
| Open | T-23 | Task | Not Started | 10/8/2026 | 3 Wheel Blowers Pre Seaason Purple Tag | Recurring due date: 9/21/2026 | — | — | — | — | — | — | Unassigned | David | — | Start Oct 8, 2026 | Yes | 9/17/2026 | — | 3 |
| Open | T-22 | Task | Not Started | 10/8/2026 | Hurricane Pre-season Purple tag | Recurring due date: 9/14/2026 | — | — | — | — | — | — | Unassigned | David | — | Start Oct 8, 2026 | Yes | 9/14/2026 | — | 4 |
| OpenPrint | R-191 | Repair | Completed | 10/7/2026 | Mower #9 - Wright Stander X | poor performance | Propane regulator flooded with mineral deposits anda black tar substance, causing fuel delivery issues at full throttle and with pto usage. | Brake parts cleaner | — | — | — | — | Unassigned | Brad | — | Start work Oct 7, 2026 | No | 10/7/2026 | 10/7/2026 | 0 |
| OpenPrint | R-190 | Repair | Completed | 10/7/2026 | Mower #10 - Wright Stander X | poor performance, burning oil | regulator needs service | — | — | — | — | — | Unassigned | Brad | — | Start work Oct 7, 2026 | No | 10/7/2026 | 10/7/2026 | 0 |
| OpenPrint | R-189 | Repair | Completed | 10/7/2026 | Mower #5 - Wright Stander X | poor performance | After verifying the main issues typically associated with poor performance, it was found that the regulator for the propane system was getting clogged by heavy mineral build up in the regulator body and the inlet filter. | Brake parts cleaner | — | — | — | — | Unassigned | Brad | — | Start work Oct 7, 2026 | No | 10/7/2026 | 10/7/2026 | 0 |
| OpenPrint | R-183 | Repair | In Progress | 10/7/2026 | mower #7 - Wright Stander X | sluggish performance, misfiring, unable to complete field usage | During inspection found the air filter was severly clogged, left side spark plug was fouled in a normal manner, the right side spark plug was overly fouled and had an extreme amount of build up that would not burn off or clean up. Upon further investigation and checking oil level, the unit was filled approx. 2 1/2 quarts over the needed amount. Shredded belt on pto system. After addressing issues of initial complaint, unit operates at 3/4 throttle but will cut off when pto is engaged. When inspecting the intake and mixer system, heavy oil build up is visible. Breather sleeve ( venturi tube ) is craked and saturated in oil. Air flow for propane mix is now altered causing unit shut down at full throttle and when pto is engaged. | New breather sleeve ( Kawasaki) , air filter, oil, spark plugs | — | — | — | — | Brad | Merritt | Shop | Start work Oct 7, 2026 | No | 10/5/2026 | — | 4 |
| OpenPrint | R-176 | Maintenance | Not Started | 10/6/2026 | All sidewalk snow equipment | run All sidewalk snow equipment everywhere it is parked | — | — | — | — | — | — | Unassigned | David | — | Start work Oct 6, 2026 | Yes | 10/5/2026 | — | 0 |
| OpenPrint | R-174 | Repair | Not Started | 10/6/2026 | Salt Dogg S31 | terrible squeal when running in morning | — | — | — | — | — | — | Unassigned | David | — | Start work Oct 6, 2026 | No | 10/5/2026 | — | 2 |
| OpenPrint | R-168 | Repair | Not Started | 10/6/2026 | Death Star - 2005 GMC T7500 | Left front headlight is out LIC plate is expired Brake pedal on the right side sticks...the left side is operating normally No power to the back up camera---very important for usage of the vehicle Inspection out 09/26 | — | — | — | — | — | 46031 | Unassigned | Howard | — | Start work Oct 6, 2026 | No | 9/30/2026 | — | 4 |
| OpenPrint | R-164 | Repair | In Progress | 10/6/2026 | mower #7 - Wright Stander X | sluggish performance, misfiring, unable to complete field usage | During inspection found the air filter was severly clogged, left side spark plug was fouled in a normal manner, the right side spark plug was overly fouled and had an extreme amount of build up that would not burn off or clean up. Upon further investigation and checking oil level, the unit was filled approx. 2 1/2 quarts over the needed amount. Shredded belt on pto system. After addressing issues of initial complaint, unit operates at 3/4 throttle but will cut off when pto is engaged. When inspecting the intake and mixer system, heavy oil build up is visible. Breather sleeve ( venturi tube ) is craked and saturated in oil. Air flow for propane mix is now altered causing unit shut down at full throttle and when pto is engaged. | New breather sleeve ( Kawasaki) , air filter, oil, spark plugs Ignition coils are in | — | — | — | — | Brad | Merritt | Shop | Start work Oct 6, 2026 | No | 9/29/2026 | — | 4 |
| OpenPrint | R-172 | Repair | Waiting for Parts | 10/5/2026 | Stinger #01 - Stinger Quad-AER 3000 | No start, possible dead battery | power at the key, power wire to plug hsa broken connector preventing contact with the key to signal power to the starter, the harness will need to be replaced, temporary fix suggested to finish season out. after testing a direct connection and attempting the "patch" it has been found that the lack of power is a break in the harness, and the ignition cylinder, will need both replaced and wireed correctly. | need electrical t tap to finish repair | — | — | — | — | Brad | Howard | Shop | Start work Oct 5, 2026 | No | 10/1/2026 | — | 1 |
| OpenPrint | R-126 | Repair | In Progress | 10/5/2026 | Walk behind Aerator | Water drum is busted | Water drum expanded and blew, leaving massivew hole in drum. | New drum, drive bearings needed. Ordered parts from bobcat | — | — | — | — | Unassigned | Brad | — | Start work Oct 5, 2026 | No | 9/15/2026 | — | 2 |
| Open | T-27 | Task | Not Started | 10/2/2026 | Brad off | Myfieldreport- approved | — | — | — | — | — | — | Unassigned | Brad | — | Start Oct 2, 2026 | No | 9/28/2026 | — | 0 |
| OpenPrint | R-152 | Repair | Completed | 10/1/2026 | Oil Change Plus for 52 wrights | Oil Changes, air filters, spark plugs | — | — | — | — | — | — | Unassigned | David | — | Start work Oct 1, 2026 | No | 9/19/2026 | 10/1/2026 | 0 |
| OpenPrint | R-156 | Repair | Completed | 10/1/2026 | Mower #5 - Wright Stander X | performance is restricted | air valve in intake melted and broken, throttle body clogging up, spark plugs fouled, ignition coils, losing magnetic pick up, air filter clogged, cooling fins on engine clogged, oil dip stick o-ring failed, oil entering intake mixing with propane vapor, overall condition of unit was poor, cracked and dry rotted hose from engine to intake. | New plugs, igntion coils, hose, air valve, air filter | — | — | — | — | Unassigned | Brad | — | Start work Oct 1, 2026 | No | 9/25/2026 | 10/1/2026 | 2 |
| OpenPrint | R-160 | Repair | Waiting for Parts | 10/1/2026 | Stinger #01 - Stinger Quad-AER 3000 | No start, possible dead battery | power at the key, power wire to plug hsa broken connector preventing contact with the key to signal power to the starter, the harness will need to be replaced, temporary fix suggested to finish season out. after testing a direct connection and attempting the "patch" it has been found that the lack of power is a break in the harness, and the ignition cylinder, will need both replaced and wireed correctly. | — | — | — | — | — | Brad | Howard | Shop | Start work Oct 1, 2026 | No | 9/28/2026 | — | 4 |
| OpenPrint | R-171 | Repair | Completed | 9/30/2026 | string trimmer | no start | air filter crushed from being over tightened, clog at the primer bulb, fuel filter clogged as well spark plug fouled. failed intake gasket | new plug, air filter was able to be cleaned and straightned out, new ful filter, new intake gasket to replace the failed gasket, | — | — | — | — | Unassigned | Brad | — | Start work Sep 30, 2026 | No | 9/30/2026 | 9/30/2026 | 0 |
| OpenPrint | R-167 | Repair | Completed | 9/30/2026 | mower #1 - Wright Stander X | hydraulic control adjustment needed | hydraulic lever had worked itself to a lower engae point, adjustewd rod and controls are much better. | — | — | — | 1581.5 | — | Unassigned | Justin | — | Start work Sep 30, 2026 | No | 9/30/2026 | 9/30/2026 | 0 |
| OpenPrint | R-166 | Repair | Completed | 9/30/2026 | String trimmer | shuts down after starting | rechecked prior service notes, found the primer bulb was not functioning, after removal of bulb found clog in throttle intake. | new primer bulb | — | — | — | — | Brad | Brad | Shop | Start work Sep 30, 2026 | No | 9/29/2026 | 9/30/2026 | 0 |
| OpenPrint | R-149 | Repair | Completed | 9/30/2026 | Howard back pack blowers | No start and a fuel leak | Fuel leak, needs new primer bulb nad ventplug for fuel tank.unit with no start needs primer bulb assembly and service. | — | — | — | — | — | Unassigned | Howard | — | Start work Sep 30, 2026 | No | 9/18/2026 | 9/30/2026 | 0 |
| OpenPrint | R-159 | Repair | Waiting for Parts | 9/30/2026 | Mower #16 - Wright Stander X | Sluggish performance and back fire | Emissions canister on side of motor had a vacuum cap with a hole in it causing a vacuum leak and poor performance After doing that fix and operating- discovered further issue.. hydro pump belt tensioner, need spring tool for idler arm replacement. | Replaced vacuum cap, hydro pump belt tensioner, need spring tool for idler arm replacement. Crank bolt has gonbe missing ordered new from equipko | — | — | — | — | Brad | Merritt | Shop | Start work Sep 30, 2026 | No | 9/28/2026 | — | 1 |
| OpenPrint | R-170 | Repair | Not Started | 9/29/2026 | string trimmer | no start | — | — | — | — | — | — | Unassigned | Brad | — | Start work Sep 29, 2026 | No | 9/30/2026 | — | 0 |
| OpenPrint | R-165 | Repair | Completed | 9/29/2026 | Echo String trimmer #12 | sluggish performance | — | — | — | — | — | — | Unassigned | Brad | — | Start work Sep 29, 2026 | No | 9/29/2026 | 9/29/2026 | 0 |
| OpenPrint | R-163 | Repair | Completed | 9/29/2026 | Mower #6 - Wright Stander X | no start | Tech brought unit back to shop for no start issue. After getting unit off truck, Confirmed the symptom. Upon inspection the battery terminals wer loose. | — | — | — | — | — | Unassigned | Merritt | — | Start work Sep 29, 2026 | No | 9/29/2026 | 9/29/2026 | 0 |
| OpenPrint | R-162 | Repair | Waiting for Parts | 9/29/2026 | mower #7 - Wright Stander X | sluggish performance, misfiring, unable to complete field usage | During inspection found the air filter was severly clogged, left side spark plug was fouled in a normal manner, the right side spark plug was overly fouled and had an extreme amount of build up that would not burn off or clean up. Upon further investigation and checking oil level, the unit was filled approx. 2 1/2 quarts over the needed amount. Shredded belt on pto system. After addressing issues of initial complaint, unit operates at 3/4 throttle but will cut off when pto is engaged. When inspecting the intake and mixer system, heavy oil build up is visible. Breather sleeve ( venturi tube ) is craked and saturated in oil. Air flow for propane mix is now altered causing unit shut down at full throttle and when pto is engaged. | New breather sleeve ( Kawasaki) , air filter, oil, spark plugs | — | — | — | — | Brad | Merritt | Shop | Start work Sep 29, 2026 | No | 9/29/2026 | — | 0 |
| OpenPrint | R-161 | Repair | Completed | 9/29/2026 | Mower #10 - Wright Stander X | sluggish performance | Ran the unit after cleaning, tested pto, could not replicate issues from when brought in. Burns oil, smokes badly at start up regardless of cold start or repeated usage. Oil level is correct, could be piston rings, valve seats or the motor reaching end of life. | — | — | — | 1803.3 | — | Brad | Brad | — | Start work Sep 29, 2026 | No | 9/29/2026 | 9/29/2026 | 0 |
| OpenPrint | R-139 | Repair | Completed | 9/29/2026 | Mower #4 - Wright Stander X | PTO issues while operating, rpm drop and power loss | Wrong belt installed on cutter deck. | — | — | — | 1436.6 | — | Unassigned | Brad | — | Start work Sep 29, 2026 | No | 9/17/2026 | 9/29/2026 | 1 |
| OpenPrint | R-106 | Repair | Waiting for Parts | 9/28/2026 | Mower #16 - Wright Stander X | Sluggish performance and back fire | Emissions canister on side of motor had a vacuum cap with a hole in it causing a vacuum leak and poor performance After doing that fix and operating- discovered further issue.. hydro pump belt tensioner, need spring tool for idler arm replacement. | Replaced vacuum cap, hydro pump belt tensioner, need spring tool for idler arm replacement. | — | — | — | — | Unassigned | Merritt | — | Start work Sep 28, 2026 | No | 9/9/2026 | — | 1 |
| OpenPrint | R-158 | Repair | Completed | 9/28/2026 | Mower #6 - Wright Stander X | Throttle out of adjustment high reving | — | — | — | — | — | — | Unassigned | Brad | — | Start work Sep 28, 2026 | No | 9/26/2026 | 9/28/2026 | 2 |
| OpenPrint | R-157 | Repair | Completed | 9/26/2026 | Mower #9 - Wright Stander X | shuts off at full throttle | Vacuum leak causing lean condition making unit cut off at full throttle. Unit can operate at 3/4 throttle with blades running and have no issue. Replaced plugs and air filter due to condition durin ginspection. Loose vacuum clamp on side of engine. Bolt missing on right side hydraulic pump pulley, replaced bolt. | Spark plugs, air filter | — | — | — | — | Unassigned | Brad | — | Start work Sep 26, 2026 | No | 9/26/2026 | 9/26/2026 | 0 |
| Open | T-25 | Task | Not Started | 9/25/2026 | Brad medical | Submitted in myfield report leaving early appointment is at 3pm | — | — | — | — | — | — | Unassigned | Brad | — | Start Sep 25, 2026 | No | 9/18/2026 | — | 4 |
| OpenPrint | R-146 | Repair | Completed | 9/24/2026 | String Trimmer #2 - Echo SRM-2320T | No start | Starter spring inside of pull cord assembly broken. | — | — | — | — | — | Brad | Justin | Shop | Start work Sep 24, 2026 | No | 9/18/2026 | 9/24/2026 | 0 |
| OpenPrint | R-141 | Repair | Completed | 9/24/2026 | Mower #11 - Wright Stander X | hydraulic tensioner failed | Idler arm pulley broken, belt has come off both pump pulleys | pull arm and pulley | — | — | — | — | Unassigned | Brad | — | Start work Sep 24, 2026 | No | 9/17/2026 | 9/24/2026 | 0 |
| OpenPrint | R-148 | Repair | Completed | 9/23/2026 | Stihl HL 94 | does not stay running | — | — | — | — | — | — | Unassigned | Brad | — | Start work Sep 23, 2026 | No | 9/18/2026 | 9/23/2026 | 0 |
| OpenPrint | R-130 | Repair | Completed | 9/23/2026 | String trimmer | Shuts off unless in full throttle, hard to start | Power cuts out when throttle is disengaged. Failed gasket at intake. Plug is fouled. | New gasket and spark plug | — | — | — | — | Unassigned | Brad | — | Start work Sep 23, 2026 | No | 9/16/2026 | 9/16/2026 | 0 |
| OpenPrint | R-135 | Repair | Completed | 9/23/2026 | Mower #9 - Wright Stander X | PTO failure | PTO switch suggested as culprit, switched out with good one, no activation. | PTO clutch | — | — | 1910.7 | — | Unassigned | Brad | — | Start work Sep 23, 2026 | No | 9/17/2026 | 9/23/2026 | 1 |
| OpenPrint | R-131 | Repair | Completed | 9/23/2026 | Mower #6 - Wright Stander X | oil loss | Refilled engine with oil, swapped propane tank with good one, unit started.....Piston knocked and oil is all over deck. Will need a new motor | — | — | — | — | — | Brad | Brad | — | Start work Sep 23, 2026 | No | 9/16/2026 | 9/23/2026 | 1 |
| OpenPrint | R-124 | Repair | Waiting for Parts | 9/22/2026 | Walk behind Aerator | Water drum is busted | Water drum expanded and blew, leaving massivew hole in drum. | New drum, drive bearings needed. Ordered parts from bobcat | — | — | — | — | Unassigned | Brad | — | Start work Sep 22, 2026 | No | 9/14/2026 | — | 2 |
| OpenPrint | R-117 | Maintenance | Not Started | 9/22/2026 | ORDER Items for 52 Biannual Oil CHange PLUS | 52 wright mowers OIl change, air filters, spark plugs. Mechanic give count to Admin for ordering | — | — | — | — | — | — | Unassigned | David | — | Start work Sep 22, 2026 | Yes | 9/14/2026 | — | 4 |
| OpenPrint | R-145 | Repair | Waiting for Parts | 9/18/2026 | String Trimmer #2 - Echo SRM-2320T | No start | Starter spring inside of pull cord assembly broken. | — | — | — | — | — | Brad | Justin | Shop | Start work Sep 18, 2026 | No | 9/18/2026 | — | 0 |
| OpenPrint | R-144 | Repair | Waiting for Parts | 9/18/2026 | Stigl HS 82T | random shut down during operation | — | — | — | — | — | — | Unassigned | Brad | — | Start work Sep 18, 2026 | No | 9/17/2026 | — | 0 |
| OpenPrint | R-143 | Repair | Waiting for Parts | 9/18/2026 | Stihl HL 94 | does not stay running | — | — | — | — | — | — | Unassigned | Brad | — | Start work Sep 18, 2026 | No | 9/17/2026 | — | 0 |
| OpenPrint | R-142 | Repair | Waiting for Parts | 9/18/2026 | Howard back pack blowers | No start and a fuel leak | Fuel leak, needs new primer bulb nad ventplug for fuel tank.unit with no start needs primer bulb assembly and service. | — | — | — | — | — | Unassigned | Howard | — | Start work Sep 18, 2026 | No | 9/17/2026 | — | 0 |
| OpenPrint | R-118 | Repair | Not Started | 9/18/2026 | Oil Change Plus for 52 wrights | Oil Changes, air filters, spark plugs | — | — | — | — | — | — | Unassigned | David | — | Start work Sep 18, 2026 | Yes | 9/14/2026 | — | 0 |
| Open | T-24 | Task | Completed | 9/18/2026 | Brad Late arrival | AM doctor appointment, will be arriving into work late, confirmed in Myfieldreport, approved by Howard | — | — | — | — | — | — | Unassigned | Brad | — | Start Sep 18, 2026 | No | 9/17/2026 | 9/18/2026 | 0 |
| OpenPrint | R-116 | Repair | Completed | 9/18/2026 | BB8 - 2021 Ford Transit Connect | Camera install | — | — | — | — | — | — | Unassigned | Brad | — | Start work Sep 18, 2026 | No | 9/14/2026 | 9/18/2026 | 5 |
| OpenPrint | R-138 | Repair | Completed | 9/17/2026 | mower #7 - Wright Stander X | no start | Ignitoin assembly bad. | — | — | — | — | — | Unassigned | Brad | — | Start work Sep 17, 2026 | No | 9/17/2026 | 9/17/2026 | 0 |
| OpenPrint | R-112 | Repair | Completed | 9/17/2026 | Aerator walk behind | Rotational lock up in tines/belt system | Drive pulley bent catching tines causing movement to stop | — | — | — | — | — | Unassigned | Brad | — | Start work Sep 17, 2026 | No | 9/10/2026 | 9/17/2026 | 3 |
| OpenPrint | R-115 | Repair | Completed | 9/16/2026 | Yellow Leaf VAC | LED light does not work | Lights work | — | — | — | — | — | Unassigned | Brad | — | Start work Sep 16, 2026 | No | 9/14/2026 | 9/16/2026 | 2 |
| OpenPrint | R-128 | Repair | Completed | 9/16/2026 | Echo String trimmer #5 | Fuel line came loose, performance is sluggish | Fuel line to carb was pulled out, unit runs under powered. | New plug, air filter | — | — | — | — | Unassigned | Brad | — | Start work Sep 16, 2026 | No | 9/16/2026 | 9/16/2026 | 3 |
| OpenPrint | R-85 | Repair | Completed | 9/16/2026 | granular spreader - Lesco 101186 | lost a wheel in transit | Wheel is gone | New wheel assembly | — | — | — | — | Brad | Howard | Shop | Start work Sep 16, 2026 | No | 9/2/2026 | 9/16/2026 | 4 |
| OpenPrint | R-134 | Repair | Completed | 9/16/2026 | Mower #11 - Wright Stander X | Complaint of smoke and noise from right hydro pump | Could not replicate issues. Noticed a residual burn off smell under operation. | — | — | — | 1833.7 | — | Brad | Justin | Shop | Start work Sep 16, 2026 | No | 9/16/2026 | 9/16/2026 | 5 |
| OpenPrint | R-129 | Repair | Completed | 9/16/2026 | String trimmer | Shuts off unless in full throttle, hard to start | Power cuts out when throttle is disengaged. Failed gasket at intake. Plug is fouled. | New gasket and spark plug, fuel line, plunger, fuel filter | — | — | — | — | Unassigned | Brad | — | Start work Sep 16, 2026 | No | 9/16/2026 | 9/16/2026 | 6 |
| OpenPrint | R-127 | Repair | In Progress | 9/15/2026 | Echo String trimmer #5 | Fuel line came loose, performance is sluggish | Fuel line to carb was pulled out, unit runs under powered. | New plug, air filter | — | — | — | — | Unassigned | Brad | — | Start work Sep 15, 2026 | No | 9/15/2026 | — | 0 |
| OpenPrint | R-99 | Repair | Completed | 9/15/2026 | hurricane blower in lobby | need to trouble shoot / fix the light on the machine | Wiringt faulty will need to be redone | — | — | — | — | — | Unassigned | Howard | — | Start work Sep 15, 2026 | No | 9/8/2026 | 9/15/2026 | 2 |
| OpenPrint | R-110 | Repair | Completed | 9/15/2026 | Ferris Blower | install light | — | — | — | — | — | — | Unassigned | Brad | — | Start work Sep 15, 2026 | No | 9/10/2026 | 9/15/2026 | 3 |
| Open | T-21 | Task | Completed | 9/15/2026 | count backpack blowers | 15 back pack blowers, 4 red tagged.....11 total on trucks 4 in house | — | — | — | — | — | — | Unassigned | David | — | Start Sep 15, 2026 | No | 9/14/2026 | 9/15/2026 | 4 |
| OpenPrint | R-93 | Maintenance | Completed | 9/14/2026 | 2 salt spinners | replacing drive bearings / sand / coat with the black sealant | — | new bearings, Equipko to order parts needed for reassembly. Projected arrival middle next week. disassembly held up by one bearing, prep is next | — | — | — | — | Brad | Howard | Shop | Start work Sep 14, 2026 | No | 9/8/2026 | 9/14/2026 | 1 |
| OpenPrint | R-91 | Maintenance | Completed | 9/13/2026 | Trucks | All Trucks Oil Changes | — | — | — | — | — | — | Brad | David | Shop | Start work Sep 13, 2026 | No | 9/6/2026 | 9/8/2026 | 0 |
| OpenPrint | R-96 | Repair | Completed | 9/13/2026 | Mower #10 - Wright Stander X | Unit shuts off in low throttle | Could not replicate issue, best to do service, during inspection, found left hydro pump is leaking. update : 08/25/2026--- under operation at full speed unit unit loses power, reducing throttle helps to level engine speed. Unit produces brownish/black smoke then produses a small amount of blueish smoke before operating normally. | hydro pump seal kit, spark plug wire, ignition coil, caster wheel | — | — | 1789.4 | — | Brad | Brad | Shop | Start work Sep 13, 2026 | No | 9/8/2026 | 9/9/2026 | 2 |
| Open | T-19 | Task | Not Started | 9/11/2026 | Brad off | Medical appointment---submitted in myfield report | — | — | — | — | — | — | Unassigned | Brad | — | Start Sep 11, 2026 | No | 9/8/2026 | — | 0 |
| OpenPrint | R-109 | Repair | Completed | 9/10/2026 | Aerator walk behind | Rotational lock up in tines/belt system | Drive pulley bent catching tines causing movement to stop | — | — | — | — | — | Unassigned | Brad | — | Start work Sep 10, 2026 | No | 9/10/2026 | 9/10/2026 | 0 |
| OpenPrint | R-108 | Repair | Completed | 9/10/2026 | String trimmer #0 | Unit brought in for service due to water exposure | signs of water contamination in air filter element, throttle body and inside engine. Unit was not run after water exposure. New plug and filter will be installed, cleaning will be needed as well | New air filter element, new spark plug | — | — | — | — | Unassigned | Merritt | — | Start work Sep 10, 2026 | No | 9/10/2026 | 9/10/2026 | 0 |
| OpenPrint | R-92 | Maintenance | Completed | 9/10/2026 | 2 salt spinners | replacing drive bearings / sand / coat with the black sealant | — | new bearings, Equipko to order parts needed for reassembly. Projected arrival middle next week. disassembly held up by one bearing, prep is next | — | — | — | — | Brad | Howard | Shop | Start work Sep 10, 2026 | No | 9/8/2026 | 9/10/2026 | 0 |
| OpenPrint | R-88 | Repair | Waiting for Parts | 9/10/2026 | Mower #8 - Wright Stander X | Over revving; Brake handle won't stick in place | Parking brake bushings have failed, spring pressure is pulling lever back down, adjustments need made Wright has discontinued the bushings. No available vendors offer inventory to purchase. Throttle operation needs adjustment. High revving symptom seems to be from a vacuum leak. Triage of unit will go further. Replaced the vacuum cap, unit runs fairly smooth. Rpms match setting when in operation but come back up at idle. | will have to find a third party source for parts at this time. | — | — | — | — | Unassigned | David | — | Start work Sep 10, 2026 | No | 9/2/2026 | — | 1 |
| OpenPrint | R-103 | Repair | Completed | 9/10/2026 | Echo Stick edger #5 | Air filter assemble broken/missing. Performance failure with air box on | Air cover system missing multiple parts. Unit will need a new blade. requires new 10x1.25 nut for blade to be mounted it is a left hand thread, new one is ordered. | New intake cover, air filter element, foam insert and mounting hardware, new blade nylon nut for head | $6.32 | — | — | — | Unassigned | Justin | Shop | Start work Sep 10, 2026 | No | 9/9/2026 | 9/10/2026 | 6 |
| OpenPrint | R-105 | Repair | Waiting for Parts | 9/9/2026 | Mower #16 - Wright Stander X | Sluggish performance and back fire | Emissions canister on side of motor had a vacuum cap with a hole in it causing a vacuum leak and poor performance | Replaced vacuum cap, hydro pump belt tensioner | — | — | — | — | Unassigned | Merritt | — | Start work Sep 9, 2026 | No | 9/9/2026 | — | 0 |
| OpenPrint | R-104 | Repair | Completed | 9/9/2026 | Mower #5 - Wright Stander X | Power failure when pto is enaged | PTO clutch locking up causing power failure. | PTO Clutch | — | — | — | — | Brad | Brad | Shop | Start work Sep 9, 2026 | No | 9/9/2026 | 9/9/2026 | 0 |
| OpenPrint | R-52 | Maintenance | Completed | 9/9/2026 | C3P0 - 2018 Ford Tranist Connect | Camera install | Windshield needs to be replaced scheduled with Auto Glass Plus for Friday morning 08-21-2026, state inspection expired. Oil change and TPMS warning lights are on as well, scheduled for drop off with Arrow Transmission for State Inspection | — | — | — | — | — | Unassigned | Brad | — | Start work Sep 9, 2026 | No | 8/19/2026 | 9/9/2026 | 2 |
| OpenPrint | R-100 | Repair | Completed | 9/9/2026 | mower #11 | two flat tires | Two flat tires as noted in the ticket when dropped off | Two tires | — | — | — | — | Unassigned | Justin | — | Start work Sep 9, 2026 | No | 9/9/2026 | 9/9/2026 | 3 |
| OpenPrint | R-98 | Repair | Completed | 9/9/2026 | Mower #6 - Wright Stander X | Steering handle on left side loose | Nut to attach arm to hydro pump missing. | — | — | — | 966.1 | — | Unassigned | Brad | — | Start work Sep 9, 2026 | No | 9/8/2026 | 9/9/2026 | 4 |
| OpenPrint | R-101 | Repair | Completed | 9/9/2026 | Mower #10 - Wright Stander X | Flat tire on right side | Tire losing air on right side | New tire | — | — | — | — | Unassigned | Brad | — | Start work Sep 9, 2026 | No | 9/9/2026 | 9/9/2026 | 5 |
| OpenPrint | R-24 | Repair | Completed | 9/9/2026 | big tex trailer (External) | at Lawrence trailer to be inspected / repaired | — | trailer is finished, waiting to pick up at same time as skid steer | — | — | — | — | Unassigned | Howard | — | Start work Sep 9, 2026 | No | 8/10/2026 | 9/8/2026 | 5 |
| OpenPrint | R-102 | Repair | Completed | 9/9/2026 | Stinger #01 - Stinger Quad-AER 3000 | flat tire on left side | Tire losing air | New tire | — | — | — | — | Unassigned | Brad | — | Start work Sep 9, 2026 | No | 9/9/2026 | 9/9/2026 | 7 |
| OpenPrint | R-82 | Repair | Waiting for Parts | 9/9/2026 | Echo Stick edger #5 | Air filter assemble broken/missing. Performance failure with air box on | Air cover system missing multiple parts. Unit will need a new blade. requires new 10x1.25 nut for blade to be mounted it is a left hand thread, new one is ordered. | New intake cover, air filter element, foam insert and mounting hardware, new blade nylon nut for head | $6.32 | — | — | — | Unassigned | Justin | Shop | Start work Sep 9, 2026 | No | 9/1/2026 | — | 8 |
| OpenPrint | R-81 | Repair | Completed | 9/8/2026 | Stinger #01 - Stinger Quad-AER 3000 | spreader inoperable | Foot switch inoperable, motor may be needed due to forced operation. | Switch, new motor. | — | — | 642.9 | — | Brad | Brad | — | Start work Sep 8, 2026 | No | 9/1/2026 | 9/8/2026 | 0 |
| OpenPrint | R-95 | Repair | Completed | 9/8/2026 | Mower #5 - Wright Stander X | Fails to stay running | During inspection foudn that the primary ground to the engine and to the fuel safety lock out were loose and had a bad connection. | Replaced fuel saftey harness and relay, cleaned adn tightened primary ground to engine. Test drove and ran PTO system, no symptoms of failure or lower performance. Cleared for field use | — | — | 966.1 | — | Unassigned | Brad | — | Start work Sep 8, 2026 | No | 9/8/2026 | 9/8/2026 | 2 |
| OpenPrint | R-94 | Repair | Completed | 9/8/2026 | Mower #6 - Wright Stander X | Steering handle on left side loose | Nut to attach arm to hydro pump missing. | Replaced missing nut with new 6/16-24 nut from Advance Auto. | — | — | 966.1 | — | Unassigned | Brad | — | Start work Sep 8, 2026 | No | 9/8/2026 | 9/8/2026 | 3 |
| OpenPrint | R-89 | Repair | Completed | 9/8/2026 | Mower #10 - Wright Stander X | Unit shuts off in low throttle | Could not replicate issue, best to do service, during inspection, found left hydro pump is leaking. update : 08/25/2026--- under operation at full speed unit unit loses power, reducing throttle helps to level engine speed. Unit produces brownish/black smoke then produses a small amount of blueish smoke before operating normally. | hydro pump seal kit, spark plug wire, ignition coil, caster wheel Found loose vacuum hose. Placed in correct location unit started, ran testing phase with adn without PTO, unit does smoke from residual oil burning off due to being overfilled. Oil level is correct after draining adn refill. Unit has passed testing and cleared for field use. | — | — | 1789.4 | — | Brad | Brad | Shop | Start work Sep 8, 2026 | No | 9/3/2026 | 9/8/2026 | 4 |
| OpenPrint | R-97 | Repair | Completed | 9/8/2026 | mower #7 - Wright Stander X | Power loss with PTO engaged | Talking with operator and going over the machine, there was a multitude of wiring issues. Ground terminals were placed incorrectly and spliced signal/power wires leading to fuel safety valve. | Cleaned up wiring and replaced relay. Relocated terminals for ground to proper placements. Machine started wihtout issue. PTO engagement does not cause power loss. No issues under testing. Cleared for field use | — | — | 966.1 | — | Unassigned | Brad | — | Start work Sep 8, 2026 | No | 9/8/2026 | 9/8/2026 | 7 |
| OpenPrint | R-87 | Maintenance | In Progress | 9/7/2026 | 2 salt spinners | replacing drive bearings / sand / coat with the black sealant | — | new bearings, Equipko to order parts needed for reassembly. Projected arrival middle next week. disassembly held up by one bearing, prep is next | — | — | — | — | Brad | Howard | Shop | Start work Sep 7, 2026 | No | 9/2/2026 | — | 1 |
| OpenPrint | R-42 | Maintenance | Completed | 9/6/2026 | Trucks | All Trucks Oil Changes | — | — | — | — | — | — | Brad | David | Shop | Start work Sep 6, 2026 | No | 8/17/2026 | 9/6/2026 | 0 |
| Open | T-14 | Task | Not Started | 9/4/2026 | Brad off | confirmed in Myfieldreport | — | — | — | — | — | — | Unassigned | Brad | — | Start Sep 4, 2026 | No | 8/28/2026 | — | 0 |
| OpenPrint | R-80 | Repair | Waiting for Parts | 9/3/2026 | Stinger #01 - Stinger Quad-AER 3000 | spreader inoperable | Foot switch inoperable, motor may be needed due to forced operation. | Switch, possibly motor | — | — | 642.9 | — | Brad | Brad | — | Start work Sep 3, 2026 | No | 9/1/2026 | — | 0 |
| OpenPrint | R-38 | Repair | Waiting for Parts | 9/3/2026 | Mower #3 - Wright Stander X | Both hydro pumps leaking | Both hydro pumps are leaking. Upper gaskets leaking on both left and right pumps. Seal kits have been delivered. Caster wheel on front right is broken. Inspection of unit shows no other issues at this time. | Seal kits and fluid | — | — | — | — | Unassigned | Brad | — | Start work Sep 3, 2026 | No | 8/14/2026 | — | 0 |
| OpenPrint | R-78 | Repair | Waiting for Parts | 9/3/2026 | Echo Stick edger #5 | Air filter assemble broken/missing. Performance failure with air box on | Air cover system missing multiple parts. Unit will need a new blade. | New intake cover, ai filter element, faom insert and mounting hardware | — | — | — | — | Unassigned | Justin | Shop | Start work Sep 3, 2026 | No | 9/1/2026 | — | 2 |
| OpenPrint | R-75 | Repair | Waiting for Parts | 9/3/2026 | Mower #10 - Wright Stander X | Unit shuts off in low throttle | Could not replicate issue, best to do service, during inspection, found left hydro pump is leaking. update : 08/25/2026--- under operation at full speed unit unit loses power, reducing throttle helps to level engine speed. Unit produces brownish/black smoke then produses a small amount of blueish smoke before operating normally. | hydro pump seal kit, spark plug wire, ignition coil, caster wheel | — | — | 1789.4 | — | Brad | Brad | Shop | Start work Sep 3, 2026 | No | 8/31/2026 | — | 2 |
| OpenPrint | R-86 | Repair | Completed | 9/2/2026 | Mower #5 - Wright Stander X | shut off during operation on site | Upon cleaning the unit, brought in with assumption there was a broken wire somewhere, no wiring was damged. Unit works as it should. | — | — | — | 1723.7 | — | Unassigned | Brad | — | Start work Sep 2, 2026 | No | 9/2/2026 | 9/2/2026 | 0 |
| OpenPrint | R-84 | Repair | Completed | 9/2/2026 | BB8 - 2021 Ford Transit Connect | Does not start | Battery died, it is an AGM, Does not accept traditional 12v charging, battery was unable to test. Showed 10.8v will need to be replaced and alternator to be tested to ensure proper charging is being completed under operation. | Battery | — | — | — | — | Unassigned | Brad | — | Start work Sep 2, 2026 | No | 9/2/2026 | 9/2/2026 | 0 |
| OpenPrint | R-83 | Repair | Waiting for Parts | 9/2/2026 | granular spreader - Lesco 101186 | lost a wheel in transit | Wheel is gone | New wheel assembly | — | — | — | — | Brad | Howard | Shop | Start work Sep 2, 2026 | No | 9/1/2026 | — | 0 |
| Open | T-15 | Task | Completed | 9/2/2026 | Oil Change cart | Set up cart so we can do oil changes on SAT | — | — | — | — | — | — | Unassigned | Howard | — | Start Sep 2, 2026 | No | 8/31/2026 | 9/2/2026 | 0 |
| OpenPrint | R-71 | Maintenance | Waiting for Parts | 9/2/2026 | 2 salt spinners | replacing drive bearings / sand / coat with the black sealant | — | new bearings, Equipko to order parts needed for reassembly. Projected arrival middle next week. disassembly held up by one bearing, prep is next | — | — | — | — | Brad | Howard | Shop | Start work Sep 2, 2026 | No | 8/27/2026 | — | 1 |
| OpenPrint | R-77 | Repair | Completed | 9/1/2026 | Echo Stick edger #3 - Echo | missing heat shield for exhaust | Exhaust shield was broken, noticed that operation was lacking, throttle was sluggish. Upon further inspection, air filters clogged, spark plug was fouled. | New exhasut cover, plug, air filter elements, parts cleaner. | — | — | — | — | Brad | Brad | — | Start work Sep 1, 2026 | No | 9/1/2026 | 9/1/2026 | 1 |
| OpenPrint | R-76 | Repair | Waiting for Parts | 9/1/2026 | Echo Stick edger #5 | Air filter assemble broken/missing. Performance failure with air box on | Air cover system missing multiple parts. Unit will need a new blade. | New intake cover, ai filter element, faom insert and mounting hardware | — | — | — | — | Unassigned | Justin | Shop | Start work Sep 1, 2026 | No | 8/31/2026 | — | 2 |
| OpenPrint | R-79 | Repair | Completed | 9/1/2026 | Echo String trimmer #1 - Echo SRM-2320T | Power loss during operation | Spark plug was fluid soaked and fouled. inspected unit for other issues, found air fliter was clogged. | New spark plug and air filter | — | — | — | — | Brad | Brad | Shop | Start work Sep 1, 2026 | No | 9/1/2026 | 9/1/2026 | 3 |
| Open | T-11 | Task | Not Started | 9/1/2026 | Renew registration / plate - C3P0 - Ford Tranist Connect | Registration or plate expires 9/1/2026. This task was created automatically because the expiration is within two months. | — | — | — | — | — | — | Unassigned | — | Office / DMV | Start Sep 1, 2026 | No | 8/19/2026 | — | 6 |
| OpenPrint | R-72 | Repair | Completed | 8/31/2026 | Mower #16 - Wright Stander X | Unit loses power and starts to back fire. When symptoms show strong smell of propane is apparent. | fluid from hydraulic line blowing has gotten inbto intake system. will need tear down, cleaning, then reassembly. At this time no parts are needed, | — | — | — | — | — | Unassigned | Brad | — | Start work Aug 31, 2026 | No | 8/27/2026 | 8/31/2026 | 0 |
| OpenPrint | R-73 | Repair | Completed | 8/31/2026 | Yoda - 2018 Isuzu NPR | No start, batteries do not hold charge, dies after first drive | Batteries do not hold charge, power loss after drive due to charging system failure. | New alternator, batteries | $655.88 | 3.5 | — | — | Brad | Brad | Shop | Start work Aug 31, 2026 | No | 8/28/2026 | 8/31/2026 | 1 |
| OpenPrint | R-40 | Repair | Waiting for Parts | 8/31/2026 | Mower #10 - Wright Stander X | Unit shuts off in low throttle | Could not replicate issue, best to do service, during inspection, found left hydro pump is leaking. update : 08/25/2026--- under operation at full speed unit unit loses power, reducing throttle helps to level engine speed. Unit produses brownish/black smoke then produses a small amount of bluesih smoke before operating normally. | hydro pump seal kit, spark plug wire, ignition coil, caster wheel | — | — | 1789.4 | — | Brad | Brad | Shop | Start work Aug 31, 2026 | No | 8/15/2026 | — | 2 |
| OpenPrint | R-57 | Repair | In Progress | 8/31/2026 | Groot - 1998 Ford F-550 (External) | Severe shudder at all speed ranges, in forward and reverse operation | Driveshaft carrier bearing failed, shudder is coming from rotational free play in drive shaft | — | $74.99 | 5 | — | — | Brad | Brad | Shop | Start work Aug 31, 2026 | No | 8/21/2026 | — | 3 |
| OpenPrint | R-70 | Repair | Completed | 8/28/2026 | Walk behind - eXmark TTS481CKA36300 | Pull cord assembly broken, power restriction. No reverse, throttle does not respond setting higher. Backfire symptom in exhaust | Throttle arm lower engine side does not move, has worked out of gearing alignment completion slated for 08/25/2026 | — | — | — | 465.3 | — | Brad | Brad | Shop | Start work Aug 28, 2026 | No | 8/27/2026 | 8/28/2026 | 1 |
| OpenPrint | R-55 | Repair | Waiting for Parts | 8/28/2026 | Yoda - 2018 Isuzu NPR | No start, batteries do not hold charge, dies after first drive | Batteries do not hold charge, power loss after drive due to charging system failure. | New alternator, batteries | $655.88 | 3.5 | — | — | Brad | Brad | Shop | Start work Aug 28, 2026 | No | 8/20/2026 | — | 2 |
| Open | T-7 | Task | Completed | 8/28/2026 | Brads SUPER Service | Create the template for mower / string trimmer / back pack blower What are the things that will happen to each type of equip no matter what they entered the shop for... | — | — | — | — | — | — | Unassigned | Howard | — | Start Aug 28, 2026 | No | 8/14/2026 | 8/28/2026 | 3 |
| OpenPrint | R-69 | Repair | Completed | 8/27/2026 | Mower #16 - Wright Stander X | Fluid leak | Left side hydraulic hose has a hole in it, immediately starts streaming out when mower is started. | left side 35 inch high pressure hydraulic hose PN 33410126, hydraulic system filled and air pockets removed, hydraulic system repaired and sealed, air has been removed, back firing and throttle sticking is now the issue | — | — | 1038.7 | — | Brad | Brad | Shop | Start work Aug 27, 2026 | No | 8/27/2026 | 8/27/2026 | 1 |
| OpenPrint | R-67 | Maintenance | Waiting for Parts | 8/27/2026 | 2 salt spinners | replacing drive bearings / sand / coat with the black sealant | — | new bearings, Equipko to order parts needed for reassembly. Projected arrival middle next week. disassembly held up by one bearing, prep is next | — | — | — | — | Brad | Howard | Shop | Start work Aug 27, 2026 | No | 8/25/2026 | — | 1 |
| OpenPrint | R-56 | Repair | In Progress | 8/26/2026 | Mower #16 - Wright Stander X | Fluid leak | Left side hydraulic hose has a hole in it, immediately starts streaming out when mower is started. | left side 35 inch high pressure hydraulic hose PN 33410126, hydraulic system filled and air pockets removed, hydraulic system repaired and sealed, air has been removed, back firing and throttle sticking is now the issue | — | — | 1038.7 | — | Brad | Brad | Shop | Start work Aug 26, 2026 | No | 8/20/2026 | — | 0 |
| OpenPrint | R-61 | Repair | In Progress | 8/26/2026 | Walk behind - eXmark TTS481CKA36300 | Pull cord assembly broken, power restriction. No reverse, throttle does not respond setting higher. Backfire symptom in exhaust | Throttle arm lower engine side does not move, has worked out of gearing alignment completion slated for 08/25/2026 | — | — | — | 465.3 | — | Brad | Brad | Shop | Start work Aug 26, 2026 | No | 8/22/2026 | — | 3 |
| OpenPrint | R-68 | Repair | Completed | 8/25/2026 | mower #7 - Wright Stander X | hydraulic fluid empty | Hydraulic fluid needed refilled and air bled out | 15W50 Hydrostatic fluid | — | — | — | — | Unassigned | Brad | — | Start work Aug 25, 2026 | No | 8/25/2026 | 8/25/2026 | 0 |
| OpenPrint | R-60 | Repair | Completed | 8/25/2026 | Mower #12 - Wright Stander X | pully system inoperable on deck | belt stretched, jumped off PTO clutch, tensioner got stuck, \will need to replace the belt and resety the pulleys | new belt A-B81k | — | 0.4 | — | — | Unassigned | Brad | — | Start work Aug 25, 2026 | No | 8/22/2026 | 8/25/2026 | 0 |
| OpenPrint | R-65 | Maintenance | Waiting for Parts | 8/25/2026 | 2 salt spinners | replacing drive bearings / sand / coat with the black sealant | — | new bearings, Equipko to order parts needed for reassembly. Projected arrival middle next week. disassembly held up by one bearing, prep is next | — | — | — | — | Brad | Howard | Shop | Start work Aug 25, 2026 | No | 8/24/2026 | — | 2 |
| Open | T-13 | Task | Completed | 8/24/2026 | Add breaker and bus tospinner line | add breaker and bus to spinners | — | — | — | — | — | — | Unassigned | David | — | Start Aug 24, 2026 | No | 8/22/2026 | 8/24/2026 | 1 |
| OpenPrint | R-62 | Maintenance | Waiting for Parts | 8/24/2026 | 2 salt spinners | replacing drive bearings / sand / coat with the black sealant | — | new bearings, Equipko to order parts needed for reassembly. Projected arrival middle next week. disassembly held up by one bearing, prep is next | — | — | — | — | Brad | Howard | Shop | Start work Aug 24, 2026 | No | 8/22/2026 | — | 2 |
| OpenPrint | R-31 | Repair | Not Started | 8/24/2026 | Michelangelo | Fix the rusted out metal supporting the trailer gates | will need assistance finding the correct shop to complete needed repair | — | — | — | — | — | Unassigned | Howard | — | Start work Aug 24, 2026 | No | 8/12/2026 | — | 4 |
| OpenPrint | R-63 | Repair | Completed | 8/24/2026 | C3P0 - 2018 Ford Tranist Connect (External) | Inspection at Aarrow | — | dropped off 08/24/2026 12:00pm moved to external until shop is finished and unit is returned | — | — | — | — | Unassigned | Howard | Arrow Transmission | Start work Aug 24, 2026 | No | 8/24/2026 | 9/9/2026 | 6 |
| OpenPrint | R-59 | Maintenance | Not Started | 8/21/2026 | 2 salt spinners | replacing drive bearings / sand / coat with the black sealant | — | new bearings, Equipko to order parts needed for reassembly. Projected arrival middle next week. | — | — | — | — | Brad | Howard | Shop | Start work Aug 21, 2026 | No | 8/21/2026 | — | 0 |
| OpenPrint | R-53 | Repair | Not Started | 8/21/2026 | Walk behind - eXmark TTS481CKA36300 | Pull cord assembly broken, power restriction. No reverse, throttle does not respond setting higher. Backfire symptom in exhaust | Throttle arm lower engine side does not move, has worked out of gearing alignment | — | — | — | 465.3 | — | Brad | Brad | Shop | Start work Aug 21, 2026 | No | 8/20/2026 | — | 0 |
| OpenPrint | R-51 | Repair | Not Started | 8/21/2026 | Mower #12 - Wright Stander X | pully system inoperable on deck | — | — | — | — | — | — | Unassigned | Brad | — | Start work Aug 21, 2026 | No | 8/19/2026 | — | 0 |
| Open | T-12 | Task | Not Started | 8/21/2026 | Add breaker and bus tospinner line | add breaker and bus to spinners | — | — | — | — | — | — | Unassigned | David | — | Start Aug 21, 2026 | No | 8/20/2026 | — | 0 |
| OpenPrint | R-54 | Maintenance | Not Started | 8/20/2026 | 2 salt spinners | replacing drive bearings / sand / coat with the black sealant | — | new bearings, Equipko to order parts needed for reassembly. Projected arrival middle next week. | — | — | — | — | Brad | Howard | Shop | Start work Aug 20, 2026 | No | 8/20/2026 | — | 1 |
| OpenPrint | R-15 | Repair | In Progress | 8/20/2026 | Groot - 1998 Ford F-550 | Severe shudder at all speed ranges, in forward and reverse operation | Driveshaft carrier bearing failed, shudder is coming from rotational free play in drive shaft | New carrier bearing | $74.99 | 5 | — | — | Brad | Brad | Shop | Start work Aug 20, 2026 | No | 8/6/2026 | — | 2 |
| OpenPrint | R-16 | Repair | In Progress | 8/20/2026 | Ford F-550 | No start and coolant leak | Bateeries have dead cell, not allowing proper charge, alternator failed charge test, water pump has leak | Water pump, batteries, alternator and new coolant | — | 8 | — | — | Brad | Brad | Shop | Start work Aug 20, 2026 | No | 8/6/2026 | — | 3 |
| OpenPrint | R-50 | Repair | Completed | 8/19/2026 | 32" WALK BEHIND - Ferris FW15 Hydro | Blade bolt broken | Primary bolt for blade broken off | new bolt | — | — | — | — | Unassigned | Brad | — | Start work Aug 19, 2026 | No | 8/19/2026 | 8/19/2026 | 1 |
| OpenPrint | R-46 | Maintenance | In Progress | 8/19/2026 | 2 salt spinners | replacing drive bearings / sand / coat with the black sealant | — | — | — | — | — | — | Unassigned | Howard | — | Start work Aug 19, 2026 | No | 8/18/2026 | — | 2 |
| Open | T-10 | Task | Not Started | 8/19/2026 | Add breaker and bus tospinner line | add breaker and bus to spinners | — | — | — | — | — | — | Unassigned | David | — | Start Aug 19, 2026 | No | 8/19/2026 | — | 3 |
| OpenPrint | R-48 | Repair | In Progress | 8/19/2026 | Yoda - 2018 Isuzu NPR | No start, batteries do not hold charge, dies after first drive | Batteries do not hold charge, power loss after drive due to charging system failure. | New alternator, batteries | $655.88 | 3.5 | — | — | Brad | Brad | Shop | Start work Aug 19, 2026 | No | 8/19/2026 | — | 4 |
| OpenPrint | R-43 | Repair | Not Started | 8/19/2026 | Walk behind - eXmark TTS481CKA36300 | Pull cord assembly broken, power restriction. No reverse, throttle does not respond setting higher. Backfire symptom in exhaust | Throttle arm lower engine side does not move, has worked out of gearing alignment | — | — | — | 465.3 | — | Brad | Brad | Shop | Start work Aug 19, 2026 | No | 8/18/2026 | — | 5 |
| OpenPrint | R-17 | Repair | Not Started | 8/18/2026 | Yoda - 2018 Isuzu NPR | No start, batteries do not hold charge, dies after first drive | Batteries do not hold charge, power loss after drive due to charging system failure. | New alternator, batteries | $655.88 | 3.5 | — | — | Brad | Brad | Shop | Start work Aug 18, 2026 | No | 8/7/2026 | — | 2 |
| OpenPrint | R-22 | Repair | Completed | 8/18/2026 | replace the motor on the black spreader | motor replacement | — | new spinner motor | — | — | — | — | Unassigned | Howard | — | Start work Aug 18, 2026 | No | 8/10/2026 | 8/18/2026 | 3 |
| OpenPrint | R-41 | Maintenance | Not Started | 8/18/2026 | 2 small vans | Install camera systems | — | — | — | — | — | — | Unassigned | Brad | — | Start work Aug 18, 2026 | No | 8/16/2026 | — | 4 |
| OpenPrint | R-45 | Repair | Completed | 8/18/2026 | Rapheal | Lift gate shocks failed | Left gate shocks leaking and lost charge | 2 new support shocks | — | — | — | — | Unassigned | Brad | — | Start work Aug 18, 2026 | No | 8/18/2026 | 8/18/2026 | 5 |
| OpenPrint | R-47 | Repair | Completed | 8/17/2026 | Leonardo | Replace lower shock bracket | — | — | — | — | — | — | Unassigned | Brad | — | Start work Aug 17, 2026 | No | 8/18/2026 | 8/18/2026 | 0 |
| OpenPrint | R-34 | Repair | Not Started | 8/17/2026 | Walk behind - eXmark TTS481CKA36300 | Pull cord assembly broken, power restriction. No reverse, throttle does not respond setting higher. Backfire symptom in exhaust | Throttle arm lower engine side does not move, has worked out of gearing alignment | — | — | — | 465.3 | — | Brad | Brad | Shop | Start work Aug 17, 2026 | No | 8/14/2026 | — | 0 |
| Open | T-9 | Task | Not Started | 8/17/2026 | Summer Shop Day | Recurring due date: 8/17/2026 Shop Days -Summer Major closet review - stocked, organized, clean Empty Air compressor Touch up trucks and equipment paint Pressure wash around warehouse, fuel tanks Check first aid kits Plastidip gate pins? Blow out office computes Change battery in doors Clean ice machine Deep Office clean Change office air filter Change water filter Clean coolers Check oil dri, Penn mulch supply Lube Garage doors Change air hose fittings Trailers- Pressure wash, seal and paint | — | — | — | — | — | — | Unassigned | David | — | Unscheduled Bank · Due Aug 17, 2026 | Yes | 8/19/2026 | — | 0 |
| OpenPrint | R-37 | Repair | Not Started | 8/17/2026 | Rapheal | Lift gate shocks failed | — | — | — | — | — | — | Unassigned | Brad | — | Start work Aug 17, 2026 | No | 8/14/2026 | — | 1 |
| OpenPrint | R-39 | Maintenance | Not Started | 8/17/2026 | 2 salt spinners | replacing drive bearings / sand / coat with the black sealant | — | — | — | — | — | — | Unassigned | Howard | — | Start work Aug 17, 2026 | No | 8/15/2026 | — | 2 |
| OpenPrint | R-35 | Maintenance | Not Started | 8/15/2026 | 2 small vans | Install camera systems | — | — | — | — | — | — | Unassigned | Brad | — | Start work Aug 15, 2026 | No | 8/14/2026 | — | 0 |
| OpenPrint | R-33 | Repair | In Progress | 8/14/2026 | Mower #10 - Wright Stander X | Unit shuts off in low throttle | Could not replicate issue, best to do service, during inspection, found left hydro pump is leaking. | — | — | — | 1789.4 | — | Brad | Brad | Shop | Start work Aug 14, 2026 | No | 8/13/2026 | — | 0 |
| OpenPrint | R-32 | Repair | Completed | 8/14/2026 | Mower #16 - Wright Stander X | PTO failure, operation intermittent | Wiring faulty and failed fuel safety switch | New harnesses from wright and blossman, replaced PTO switch and clutch, new operator safety switch | — | 3 | 1030.6 | — | Brad | Brad | Shop | Start work Aug 14, 2026 | No | 8/13/2026 | 8/14/2026 | 0 |
| Open | T-6 | Project | Completed | 8/14/2026 | Spreader Timers | Get spreaders up on the timers 08/10/2026: Ordered quick disconnect, additional wire ( 4 gauge) expected delivery from amazon on 08/12/2026 | — | — | — | — | — | — | Brad | Howard | Shop | Start Aug 14, 2026 | No | 8/13/2026 | 8/14/2026 | 0 |
| OpenPrint | R-21 | Maintenance | In Progress | 8/14/2026 | 2 salt spinners | replacing drive bearings / sand / coat with the black sealant | — | — | — | — | — | — | Unassigned | Howard | — | Start work Aug 14, 2026 | No | 8/10/2026 | — | 1 |
| OpenPrint | R-14 | Repair | Completed | 8/14/2026 | String trimmer | Power drop after extended usage | Choke plate crushed from over tightening, new plug, parts ordered to replace damaged parts and perform upkeep | New Spark plug, fuel filter, choke assembly, air filter insert and air filter secondary | — | 1.5 | — | — | Brad | Brad | Shop | Start work Aug 14, 2026 | No | 8/6/2026 | 8/13/2026 | 3 |
| OpenPrint | R-13 | Repair | In Progress | 8/13/2026 | Walk behind - eXmark TTS481CKA36300 | Pull cord assembly broken, power restriction. No reverse, throttle does not respond setting higher. Backfire symptom in exhaust | Throttle arm lower engine side does not move, has worked out of gearing alignment | — | — | — | 465.3 | — | Brad | Brad | Shop | Start work Aug 13, 2026 | No | 8/6/2026 | — | 0 |
| OpenPrint | R-12 | Repair | Completed | 8/13/2026 | Mower #8 - Wright Stander X | No start, faulty operation when does attempt to start | Faulty wiring, burn connection and failed fuel safety switch, igniton switch failed | New harness, ignition switch, operator safety switch and PTO switch | — | 3.5 | 3511.2 | — | Brad | Brad | Shop | Start work Aug 13, 2026 | No | 8/6/2026 | 8/13/2026 | 0 |
| OpenPrint | R-11 | Repair | Completed | 8/13/2026 | Mower #16 - Wright Stander X | PTO failure, operation intermittent | Wiring faulty and failed fuel safety switch. Primary harness has broken switch wiring, lower harness has broken ground for PTO system. | New harnesses from wright and blossman, replaced PTO switch and clutch, new operator safety switch | — | 3 | 1030.6 | — | Brad | Brad | Shop | Start work Aug 13, 2026 | No | 8/6/2026 | 8/17/2026 | 0 |
| OpenPrint | R-30 | Repair | Completed | 8/12/2026 | Mower #3 - Wright Stander X | No Start, clicking when attempting to start but no engagement or movement during attempt | Starter not engaging, tested battery for proper voltage, tested good at 12.6 volts, installed new starter to confirm operation no change in behvaior, motor is not spinning at all. Used power probe to check for 12V signal to start from key, power goes from key switch to PTO switch does NOT go from PTO switch to starter, issue is in harness, Need new Harness. | New starter, swapped ignition key | — | 4 | 1693.4 | — | Brad | Merritt | Shop | Start work Aug 12, 2026 | No | 8/12/2026 | 8/12/2026 | 0 |
| Open | T-5 | Project | In Progress | 8/12/2026 | Spreader Timers | Get spreaders up on the timers 08/10/2026: Ordered quick disconnect, additional wire ( 4 gauge) expected delivery from amazon on 08/12/2026 | — | — | — | — | — | — | Brad | Howard | Shop | Start Aug 12, 2026 | No | 8/11/2026 | — | 0 |
| OpenPrint | R-4 | Repair | Completed | 8/12/2026 | Lesco Spreader | Bent wheel axle | Axle bent, R&R | New wheel axle | $100.00 | 0.75 | — | — | Unassigned | Brad | Shop | Start work Aug 12, 2026 | No | 8/5/2026 | 8/10/2026 | 0 |
| OpenPrint | R-25 | Repair | Completed | 8/11/2026 | Holmes Landscape - 2004 Homes Trailer | ready to be picked up...monday afternoon | — | — | — | — | — | — | Unassigned | Howard | — | Start work Aug 11, 2026 | No | 8/10/2026 | 8/14/2026 | 0 |
| OpenPrint | R-20 | Maintenance | Completed | 8/10/2026 | Obi Wan | inspect truck / get camera in / inspection | — | Camera installed took to Arrow at 4509 Pouncey tract RD for state inspection | — | — | — | — | Unassigned | Howard | — | Start work Aug 10, 2026 | No | 8/10/2026 | 8/12/2026 | 0 |
| Open | T-4 | Project | In Progress | 8/10/2026 | Spreader Timers | Get spreaders up on the timers 08/10/2026: Ordered quick disconnect, additional wire ( 4 gauge) expected delivery from amazon on 08/12/2026 | — | — | — | — | — | — | Brad | Howard | Shop | Start Aug 10, 2026 | No | 8/8/2026 | — | 0 |
| OpenPrint | R-18 | Repair | Completed | 8/8/2026 | Mower #3 - Wright Stander X | Clicking but wont turn over | Fuel shut off relay over heating, harness having connection breaks during start up function, ignition key losing connection. | Replace ignition key assembly, fuel safety shut off harness and relay | — | 2 | 1687.9 | — | Brad | Merritt | — | Start work Aug 8, 2026 | No | 8/7/2026 | 8/10/2026 | 0 |
| Open | T-2 | Task | In Progress | 8/7/2026 | Spreader Timers | Get spreaders up on the timers | — | — | — | — | — | — | Brad | Howard | Shop | Start Aug 7, 2026 | No | 8/7/2026 | — | 0 |
| OpenPrint | R-10 | Repair | Completed | 8/6/2026 | Mower #10 | Pto failure, electrical issues during operation | Primary harness and platform switch have failed, shorted fuel shut off relay causing operation failure in totality | Harness 53490075 from wright mowers and new fuel relay CP30 with harness from blossman New pto Clutch | — | 2.5 | — | — | Brad | Brad | Shop | Start work Aug 6, 2026 | No | 8/6/2026 | 8/6/2026 | 0 |
| OpenPrint | R-9 | Repair | In Progress | 8/6/2026 | Yoda - 2018 Isuzu NPR | No start, batteries do not hold charge, dies after first drive | Batteries do not hold charge, power loss after drive due to charging system failure. | New alternator, batteries | $655.88 | 3.5 | — | — | Brad | Brad | Shop | Start work Aug 6, 2026 | No | 8/6/2026 | — | 0 |
| OpenPrint | R-1 | Repair | Waiting for Parts | 8/5/2026 | Lesco Spreader | Bent wheel axle | Axle bent, R&R | New wheel axle | $100.00 | — | — | — | Brad | Brad | Shop | Start work Aug 5, 2026 | No | 8/5/2026 | — | 0 |
| OpenPrint | R-205 | Repair | Not Started | — | Stinger #01 - Stinger Quad-AER 3000 | No start, possible dead battery | power at the key, power wire to plug hsa broken connector preventing contact with the key to signal power to the starter, the harness will need to be replaced, temporary fix suggested to finish season out. after testing a direct connection and attempting the "patch" it has been found that the lack of power is a break in the harness, and the ignition cylinder, will need both replaced and wireed correctly. | need electrical t tap to finish repair | — | — | — | — | Brad | Howard | Shop | Unscheduled Bank | No | 10/16/2026 | — | 0 |
| OpenPrint | R-204 | Repair | Not Started | — | Stick edger | poor performance | — | — | — | — | — | — | Unassigned | Brad | — | Unscheduled Bank | No | 10/16/2026 | — | 0 |
| OpenPrint | R-203 | Repair | Not Started | — | string trimmer | wont stay running | — | — | — | — | — | — | Unassigned | Brad | — | Unscheduled Bank | No | 10/16/2026 | — | 0 |
| OpenPrint | R-202 | Repair | Not Started | — | String Trimmer #9 - Echo SRM-2320T | poor performance, random shut off during operation | — | — | — | — | — | — | Unassigned | Brad | — | Unscheduled Bank | No | 10/16/2026 | — | 0 |
| OpenPrint | R-201 | Repair | Not Started | — | Walk behind Aerator | Water drum is busted | Water drum expanded and blew, leaving massivew hole in drum. | New drum, drive bearings needed. Ordered parts from bobcat | — | — | — | — | Unassigned | Brad | — | Unscheduled Bank | No | 10/15/2026 | — | 0 |
| OpenPrint | R-200 | Repair | Not Started | — | back pack blower | muffler has fallen off | — | — | — | — | — | — | Unassigned | Brad | — | Unscheduled Bank | No | 10/15/2026 | — | 0 |
| OpenPrint | R-199 | Repair | Not Started | — | back pack blower | poor performance | — | — | — | — | — | — | Unassigned | Brad | — | Unscheduled Bank | No | 10/15/2026 | — | 0 |
| OpenPrint | R-198 | Maintenance | Not Started | — | Run all Flatbeds and Deathstar | Drive all flatbeds and deathstar 5 minutes.. to the Roost and Back | — | — | — | — | — | — | Unassigned | David | — | Unscheduled Bank | No | 10/15/2026 | — | 0 |
| OpenPrint | R-197 | Repair | Not Started | — | Death Star - 2005 GMC T7500 | Left front headlight is out LIC plate is expired Brake pedal on the right side sticks...the left side is operating normally No power to the back up camera---very important for usage of the vehicle Inspection out 09/26 | — | — | — | — | — | 46031 | Unassigned | Howard | — | Unscheduled Bank | No | 10/14/2026 | — | 0 |
| OpenPrint | R-196 | Repair | Not Started | — | Stigl HS 82T | random shut down during operation | — | — | — | — | — | — | Unassigned | Brad | — | Unscheduled Bank | No | 10/14/2026 | — | 0 |
| OpenPrint | R-195 | Maintenance | Not Started | — | All sidewalk snow equipment | run All sidewalk snow equipment everywhere it is parked | — | — | — | — | — | — | Unassigned | David | — | Unscheduled Bank | No | 10/13/2026 | — | 0 |
| OpenPrint | R-194 | Repair | Not Started | — | mower #7 - Wright Stander X | sluggish performance, misfiring, unable to complete field usage | During inspection found the air filter was severly clogged, left side spark plug was fouled in a normal manner, the right side spark plug was overly fouled and had an extreme amount of build up that would not burn off or clean up. Upon further investigation and checking oil level, the unit was filled approx. 2 1/2 quarts over the needed amount. Shredded belt on pto system. After addressing issues of initial complaint, unit operates at 3/4 throttle but will cut off when pto is engaged. When inspecting the intake and mixer system, heavy oil build up is visible. Breather sleeve ( venturi tube ) is craked and saturated in oil. Air flow for propane mix is now altered causing unit shut down at full throttle and when pto is engaged. | New breather sleeve ( Kawasaki) , air filter, oil, spark plugs Ignition coils are in | — | — | — | — | Brad | Merritt | Shop | Unscheduled Bank | No | 10/12/2026 | — | 0 |
| OpenPrint | R-173 | Repair | In Progress | — | Han solo (External) | front tires needs replacement, alignment, and diag for DTC codes including throttle hesitation. License plate expired 07/26 | — | — | — | — | — | — | Unassigned | Brad | Arrow Transmission | Unscheduled Bank | No | 10/5/2026 | — | 0 |
| OpenPrint | R-153 | Maintenance | Completed | — | ORDER Items for 52 Biannual Oil CHange PLUS | 52 wright mowers OIl change, air filters, spark plugs. Mechanic give count to Admin for ordering | — | — | — | — | — | — | Unassigned | David | — | Unscheduled Bank | No | 9/23/2026 | 10/9/2026 | 0 |
| OpenPrint | R-111 | Repair | Completed | — | stinger spreader attachment (External) | mounting bracket broken | will be taken with michelangelo to be welded | — | — | — | — | — | Unassigned | Brad | — | Unscheduled Bank | No | 9/10/2026 | 9/18/2026 | 0 |
| OpenPrint | R-74 | Repair | In Progress | — | Walk behind - eXmark TTS481CKA36300 (External) | no reverse throttle issues failed no load check | Taken to Equipko 09/02/2026 | — | — | — | — | — | Unassigned | Brad | Equipko | Unscheduled Bank | No | 8/28/2026 | — | 0 |
| Open | T-33 | Task | Not Started | — | 3 Wheel Blowers Pre Seaason Purple Tag | Recurring due date: 9/21/2026 | — | — | — | — | — | — | Unassigned | David | — | Unscheduled Bank | No | 10/13/2026 | — | 0 |
| Open | T-32 | Task | Not Started | — | Hurricane Pre-season Purple tag | Recurring due date: 9/14/2026 | — | — | — | — | — | — | Unassigned | David | — | Unscheduled Bank | No | 10/13/2026 | — | 0 |
| OpenPrint | R-29 | Repair | Completed | — | Spiderman (External) | at parrish Ford | — | — | — | — | — | — | Unassigned | Howard | — | Unscheduled Bank | No | 8/10/2026 | 9/2/2026 | 0 |
| Open | T-29 | Task | Not Started | — | Renew registration / plate - Death Star - GMC T7500 | Registration or plate expires 6/1/2026. This task was created automatically because the expiration is within two months. | — | — | — | — | — | — | Unassigned | — | Office / DMV | Unscheduled Bank | No | 10/5/2026 | — | 0 |
| Open | T-28 | Task | Completed | — | Brad off | Myfieldreport- approved | — | — | — | — | — | — | Unassigned | Brad | — | Unscheduled Bank | No | 10/3/2026 | 10/5/2026 | 0 |
| OpenPrint | R-27 | Repair | Completed | — | mower (External) | at Equipko waiting on parts | — | — | — | — | — | — | Unassigned | Howard | — | Unscheduled Bank | No | 8/10/2026 | 8/27/2026 | 0 |
| OpenPrint | R-26 | Repair | Completed | — | Mower (External) | at Equipko waiting on parts | — | — | — | — | — | — | Unassigned | Howard | — | Unscheduled Bank | No | 8/10/2026 | 9/17/2026 | 0 |
| Open | T-26 | Task | Completed | — | Brad medical | Submitted in myfield report leaving early appointment is at 3pm | — | — | — | — | — | — | Unassigned | Brad | — | Unscheduled Bank | No | 9/26/2026 | 9/28/2026 | 0 |
| Open | T-17 | Task | Not Started | — | Renew registration / plate - BB8 - Ford Transit Connect | Registration or plate expires 6/1/2026. This task was created automatically because the expiration is within two months. | — | — | — | — | — | — | Unassigned | — | Office / DMV | Unscheduled Bank | No | 9/2/2026 | — | 0 |
| Open | T-16 | Task | Not Started | — | Renew registration / plate - C3P0 - Ford Tranist Connect | Registration or plate expires 9/1/2026. This task was created automatically because the expiration is within two months. | — | — | — | — | — | — | Unassigned | — | Office / DMV | Unscheduled Bank | No | 9/2/2026 | — | 0 |
| Open | T-1 | Task | Not Started | — | Renew registration / plate - Groot - Ford F-550 | Registration or plate expires 4/1/2026. This task was created automatically because the expiration is within two months. | — | — | — | — | — | — | Unassigned | — | Office / DMV | Unscheduled Bank | No | 8/6/2026 | — | 0 |
| OpenPrint | R-119 | Repair | Completed | — | Bobcat | find hose leak | Full loss of hydrauloc operation, current code C10C0-77- Rigth swash plate commanded position not reachable. No hydraulic function in the controls. Unit is in "safe mode" to preserve turbo. Unit will move a couplke of inches then down throttle/ shut off. Recommend sending to Bobcat for manufacture service. | tech will have unit 100 percent tomorrow 10/06/2026 | — | — | — | — | Unassigned | David | — | Unscheduled Bank | No | 9/14/2026 | 10/9/2026 | 2 |
| OpenPrint | R-182 | Repair | Waiting for Parts | — | Mower #16 - Wright Stander X | Sluggish performance and back fire | Emissions canister on side of motor had a vacuum cap with a hole in it causing a vacuum leak and poor performance After doing that fix and operating- discovered further issue.. hydro pump belt tensioner, need spring tool for idler arm replacement. | Replaced vacuum cap, hydro pump belt tensioner, need spring tool for idler arm replacement. | — | — | — | — | Unassigned | Merritt | — | Unscheduled Bank | No | 10/5/2026 | — | 3 |
| OpenPrint | R-66 | Repair | Completed | — | Michelangelo (External) | Fix the rusted out metal supporting the trailer gates | will need assistance finding the correct shop to complete needed repair | — | — | — | — | — | Unassigned | Howard | — | Unscheduled Bank | No | 8/25/2026 | 9/18/2026 | 5 |
| OpenPrint | R-28 | Repair | Completed | — | Skid Steer (External) | at Bobcat waiting for wiring harness | Confirmed with BobCat...unit is completed and ready for pick up | — | — | — | — | — | Unassigned | Howard | Equipko | Unscheduled Bank | No | 8/10/2026 | 9/8/2026 | 6 |